{"title":"6.35mm (1\/4\") Patchbays","description":"","products":[{"product_id":"neutrik-48-way-6-35mm-1-4-patch-panel-nys-spp-l1","title":"Neutrik 48 Way 6.35mm (1\/4\") Patchbay - NYS-SPP-L1","description":"The NYS-SPP-L1 is a economical and remarkable sleek designed 1\/4“ modular Patch Panel for 19“ rack mount (19“×1U) with a reinforced metal housing. Each of it‘s 48 PCB wired balanced channels (24 front pairs and corresponding 24 rear pairs) can either be grounded separately or in groups of individually chooseable channel numbers.\r\n\r\nThe PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification.\r\n\r\nFeatures \u0026amp; benefits\r\n\u003cul\u003e\r\n \t\u003cli\u003eIndividual grounding available for each channel separately\u003c\/li\u003e\r\n \t\u003cli\u003eRuggedized metal housing\u003c\/li\u003e\r\n \t\u003cli\u003eImproved contact design minimises wear on mated plugs\u003c\/li\u003e\r\n \t\u003cli\u003eEconomic and versatile designed 1\/4″ modular Patch Panel with 2 rows of jack sockets\u003c\/li\u003e\r\n \t\u003cli\u003e48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs\u003c\/li\u003e\r\n \t\u003cli\u003eJack PC card contains 4 balanced 1\/4″ jacks with non-tarnishing contacts, is held securely in place without the use of nuts – no little pieces to drop, break or lose\u003c\/li\u003e\r\n \t\u003cli\u003eEasy to change configuration by just flipping individual PC board\u003c\/li\u003e\r\n \t\u003cli\u003eNormalling jack is coloured grey for easy identification\u003c\/li\u003e\r\n \t\u003cli\u003e4 designation strips included for front and rear panel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nConfiguration\r\nStandard configuration, when delivered, is Half Normalled bottom row. The configuration can easily be changed by just flipping the individual PCB. Inserting a plug into the grey jack will always isolate the top against the bottom row. Alternative solution for send\/return applications by use of NYS-SPCR1 module (see accessories).\r\n\r\nGrounding\r\nThe flexible grounding system, applicable for each channel separately by simply attaching the loose supplied grounding clips to the grounding pad of the corresponding channel, offers the following alternatives:\r\n\u003cul\u003e\r\n \t\u003cli\u003eIndividual (without grounding clip): Each channel ground (sleeve contact) is connected to the dedicated ground contact of the incoming 1\/4” plug only, this is the standard configuration\u003c\/li\u003e\r\n \t\u003cli\u003eChassis common (1): The relevant channel grounds (sleeve contacts; top and bottom row) are connected to the ground flat tab via grounding clip and chassis\u003c\/li\u003e\r\n \t\u003cli\u003eChassis top (2): The dedicated top channel ground (sleeve contact) is connected to the ground flat tab via grounding clip and chassis\u003c\/li\u003e\r\n \t\u003cli\u003eChassis bottom (3): The dedicated bottom channel ground (sleeve contact) is connected to the ground flat tab via grounding clip and chassis\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Neutrik","offers":[{"title":"Default Title","offer_id":56508087402882,"sku":"NYS-SPP-L1","price":52.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/nys-spp-l1_1web.jpg?v=1774373114"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48D25","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48D25 - DB25 sockets\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48D25 - 483 x 45 x 81\r\n\r\nNet weight\r\n* CPJ48D25 - 970g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508127117698,"sku":"CPJ48D25\/LB","price":333.24,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508127150466,"sku":"CPJ48D25","price":297.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web.jpg?v=1774373579"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48d25g","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48D25G","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48D25 - DB25 sockets\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48D25 - 483 x 45 x 81\r\n\r\nNet weight\r\n* CPJ48D25 - 970g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508127281538,"sku":"CPJ48D25G\/LB","price":438.31,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508127314306,"sku":"CPJ48D25G","price":402.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_70f5c4f3-7633-4d5e-bcf6-3e21c3140ebd.jpg?v=1774373587"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48j","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48J","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48J - 6.35mm (1\/4\") type A Jack sockets\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48J - 483 x 45 x 81\r\n\r\nNet weight\r\n* CPJ48J - 970g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508127478146,"sku":"CPJ48J\/LB","price":349.73,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508127510914,"sku":"CPJ48J","price":313.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_fe15138e-86ab-4a1a-9b2a-8df1c0576e5a.jpg?v=1774373595"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48jg","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48JG","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48J - 6.35mm (1\/4\") type A Jack sockets\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48J - 483 x 45 x 81\r\n\r\nNet weight\r\n* CPJ48J - 970g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508127576450,"sku":"CPJ48JG\/LB","price":411.68,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508127609218,"sku":"CPJ48JG","price":375.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_d1d2085d-559f-4ac1-9373-8466ab908687.jpg?v=1774373603"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48p","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48P","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48P - RCA phono sockets\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48P 483 x 45 x 71\r\n\r\nNet weight\r\n* CPJ48P - 890g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508127805826,"sku":"CPJ48P\/LB","price":354.72,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508127838594,"sku":"CPJ48P","price":318.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_a84c18e0-8c07-4989-b64a-e35dc43675bf.jpg?v=1774373610"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48pg","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48PG","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48P - RCA phono sockets\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48P 483 x 45 x 71\r\n\r\nNet weight\r\n* CPJ48P - 890g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508127969666,"sku":"CPJ48PG\/LB","price":415.74,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508128002434,"sku":"CPJ48PG","price":379.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_2d1de99c-597a-4886-8195-29c6c4a9c5ac.jpg?v=1774373619"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48t","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48T","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48T - Direct solder terminations\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48T 483 x 45 x 70\r\n\r\nNet weight\r\n* CPJ48T - 780g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508128330114,"sku":"CPJ48T\/LB","price":306.67,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508128362882,"sku":"CPJ48T","price":270.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_ad914303-dd8e-4673-bf36-331f65ac9a18.jpg?v=1774373626"},{"product_id":"signex-isopatch-6-35mm-1-4-patchbay-cpj48tg","title":"Signex Isopatch 6.35mm (1\/4\") Patchbay - CPJ48TG","description":"When Signex introduced the original Isopatch back in 1983, they knew that it would be popular, but they didn't know that it would remain a best seller for so long. The new Isopatch retains the design strengths of its predecessor, but now has 48 jacks that are of a new, fully-enclosed design. The new jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!\r\n\r\nThe new Isopatch still has all sockets mounted on two horizontal printed circuit boards (PCBs), rather than vertical cards that can sometimes pop out in use. This type of construction makes the Isopatch very solid and gives full access to most of the circuitry including parallel points and the special 'program pads' for normalising. The use of flexible jumper cables between top and bottom PCBs means that the Isopatch can be opened up for servicing if needed. Unlike many patch panels, the Isopatch offers half or full normalising on every channel, by simply soldering across special 'program pads' on the top PCB - No special tools are needed and there's nothing to take apart. In fact, if the Isopatch is already installed, you don't even have to unplug the rear connectors.\r\n\r\nThe Isopatch can be used for most types of audio signal including mono, stereo, balanced and unbalanced lines. It can also be used for mixer insert points without the need for special 'splitter' leads. Standard rear connector options are jack, RCA phono and direct solder, gold contact versions are also available. Add to this a very slick labelling system for designation of the front sockets and you can see why the new Isopatch is the Ultimate patch panel.\r\n\r\nFeatures\r\n* Two rows of 24 type A Jacks in 1U of rack space\r\n* Enclosed Jack design keeps out dust and dirt\r\n* Jack, RCA phono or direct solder rear connections\r\n* Half and full normalising available on all channels\r\n* Suitable for balanced\/unbalanced and stereo signals\r\n* Lacing Bar Kit available for extra rear cable support\r\n* Neat slide-in strips for socket designation\r\n* Suitable for insert points without special leads\r\n* Gold contact versions also available\r\n* PCB parallel wiring points for every Jack\r\n\r\nSpecifications:\r\nFront sockets\r\n6.35mm (1\/4\") type A Jack sockets\r\n\r\nRear termination\r\n* CPJ48T - Direct solder terminations\r\n\r\nDimensions (W×H×D)(mm)\r\n* CPJ48T 483 x 45 x 70\r\n\r\nNet weight\r\n* CPJ48T - 780g\r\n\r\nGeneral\r\n* Half and Full normalising programmable on every channel\r\n* Switch contact resistance \u0026lt;0.03 Ohm\r\n* Switch contact life \u0026gt;10,000 operations\r\n* Min. rack opening required: 442m","brand":"Signex","offers":[{"title":"Yes (+£36.00)","offer_id":56508128526722,"sku":"CPJ48TG\/LB","price":388.2,"currency_code":"GBP","in_stock":true},{"title":"No","offer_id":56508128559490,"sku":"CPJ48TG","price":352.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/9462\/4386\/files\/CPJ48_perspective-web_474a8f7e-9d1b-4c34-9d38-041018b9f53f.jpg?v=1774373634"}],"url":"https:\/\/account.custom-lynx.co.uk\/collections\/6-35mm-1-4-patchbays.oembed","provider":"Custom Lynx","version":"1.0","type":"link"}